Home Summerset IRB-TRL Infrared Sear Burner (TRL/TRL-D)

Summerset IRB-TRL Infrared Sear Burner (TRL/TRL-D)

Sale price $279.00
Add to Wishlist Add to Compare

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express
Summerset IRB-TRL Infrared Sear Burner (TRL/TRL-D)

Summerset IRB-TRL Infrared Sear Burner (TRL/TRL-D)

$279.00

1,600°F of Focused Infrared Heat — One Swap Turns Your TRL or TRLD Into a Steakhouse Searing Station

The Summerset IRB-TRL replaces a standard main burner in any TRL or TRLD grill to deliver 15,000 BTUs of ceramic infrared heat — the kind that builds a deep crust in seconds without drying out the center.

The Summerset IRB-TRL Drop-In Infrared Sear Burner is a purpose-built upgrade for Summerset TRL and TRLD gas grills — a direct-swap ceramic infrared element that replaces one standard main burner slot and converts it into a dedicated high-heat searing zone. At 15,000 BTUs, the ceramic surface reaches surface temperatures up to 1,600°F, generating the intense radiant heat needed for true Maillard reaction crust formation on steaks, chops, and seafood. The plug-and-play installation requires no orifice change, no adapter, and no permanent modifications — remove the existing burner, drop the IRB-TRL into position, and the searing zone is ready. Built from 304 stainless steel, backed by Summerset's Gold Standard Lifetime Warranty.


What the IRB-TRL Does That a Standard TRL Burner Can't

Your TRL or TRLD already has excellent main burners. The IRB-TRL doesn't replace the grill — it adds the one thing a standard tube burner can't deliver: true infrared surface temperatures high enough to sear rather than just cook.

1,600°F

Surface Temperature — Crust in Seconds, Juices Sealed In

At up to 1,600°F surface temperature, the IRB-TRL hits the grate hard enough to caramelize meat proteins on contact and build the kind of deep, even crust that takes a steakhouse kitchen to produce. The center stays rare while the outside is perfectly seared — because the heat is intense and fast, not slow and drying.

15,000 BTU

Ceramic Infrared Element — Even Radiant Heat Across the Full Zone

15,000 BTUs radiating from the ceramic surface reaches the grate evenly — no cold patches between burner tubes, no hot spots that char one side before the other is ready. Every square inch of the searing zone gets the same intense heat for consistent crust formation from edge to edge of the cut.

Plug & Play

Direct Swap — No Orifice Change, No Adapter, No Modifications

The IRB-TRL is designed specifically for TRL and TRLD grill burner slots. Remove the existing burner, drop the infrared element into position, connect it to the existing valve, and the zone is ready. No drilling, cutting, or permanent grill modifications required — and the remaining TRL burner slots are completely unaffected.

304 SS

304 Stainless Body — Matches the TRL's Build Quality

The IRB-TRL's stainless steel body matches the 304 stainless construction of the TRL and TRLD grills themselves — same corrosion resistance, same outdoor durability, same material grade you already own. The ceramic infrared element is the radiating surface; the stainless frame is built to last alongside it.

Why 1,600°F Infrared Makes a Meaningfully Better Sear Than a Standard TRL Burner at Full Power

A standard tube burner heats the air inside the grill hood, which then convects heat toward the food. Even at maximum output, the cooking surface temperature is limited by the efficiency of that air-to-grate heat transfer. An infrared burner skips the air entirely — the ceramic element converts gas energy into radiant heat that transfers directly to the grate and food surface. The result is a faster temperature rise, more consistent grate heat across the zone, and far less steam from heated air that can inhibit surface browning. At 1,600°F surface temperature, the Maillard reaction happens in seconds rather than minutes — which means a better crust and less time for the interior to climb in temperature while you wait for the outside to catch up.

Summerset IRB-TRL drop-in ceramic infrared sear burner for TRL and TRLD gas grills showing 304 stainless steel body and ceramic infrared radiating surface
The Deck & Den Take — The IRB-TRL is one of the most straightforward upgrades you can make to a TRL or TRLD — and the one that changes the day-to-day cooking experience most noticeably. Install it in an outer burner slot so the searing zone sits at one end of the grill, and you can sear on the infrared end while finishing or holding at lower heat on the remaining TRL burners in the same session. Pre-heat the infrared element on high for a few minutes before the first steak goes on — it reaches temperature faster than a standard burner. One real-world note: install it at the burner slot your TRL uses least for everyday cooking, so you're not disrupting your normal setup on non-sear sessions.

Who the IRB-TRL Is For

  • Summerset TRL and TRLD owners who cook steaks, chops, or thick fish regularly — the IRB-TRL adds 1,600°F infrared searing capability to a grill that already has excellent burners, without replacing a single component of the existing setup.
  • Cooks who want steakhouse-quality crust at home — the surface temperature differential between a standard tube burner and a 1,600°F infrared element is the difference between a good sear and a restaurant-quality one.
  • TRL owners who reverse-sear — the reverse sear method (low and slow first, then a fast high-heat finish) is ideal for infrared. Cook your roast or thick steak on the standard burners to target temp, then hit the IRB-TRL zone hard for the final crust.
  • Grillers frustrated by uneven sear results — the ceramic element's even radiant heat eliminates the cold spots between burner tubes that prevent consistent crust formation across a large piece of meat.
  • TRL and TRLD owners who want a performance upgrade without a grill replacement — the plug-and-play installation means infrared capability from the existing grill, with no permanent changes and no additional complexity to the setup.

What's Included

IRB-TRL Package

  • Summerset IRB-TRL ceramic infrared drop-in sear burner (1 unit)
  • No additional mounting hardware required — connects directly to the existing valve orifice in place of the standard burner

Summerset IRB-TRL Specifications

Performance

BTU Rating 15,000 BTU
Maximum Surface Temperature Up to 1,600°F
Burner Type Ceramic infrared radiating surface; 304 stainless steel body
Heat Delivery Radiant infrared (direct surface heat; not convective)

Compatibility & Installation

Compatible Grills Summerset TRL Series and TRLD Series gas grills
Installation Plug-and-play; replaces any standard main burner slot
Orifice / Adapter Required No
Modifications Required None

Dimensions

Dimensions (W × D) 8.5" × 16" (21.6 × 40.6 cm)

Warranty & Buyer Assurance

  • Manufacturer's Warranty — Covered by Summerset's (AMD Direct) Gold Standard Lifetime Warranty on burners as a gas grill component, honored directly by Summerset. Warranty covers replacement parts only — labor not included. Must be registered online within 30 days of purchase with proof of purchase and photo documentation. Valid for the original purchaser at the original delivery site only; void upon transfer of ownership.

Manuals & Documents

  • No manuals & documents found.

Summerset IRB-TRL — Frequently Asked Questions

Which Summerset grills is the IRB-TRL compatible with?

The IRB-TRL is designed specifically for the Summerset TRL Series and TRLD Series gas grills. It is not compatible with the Sizzler, Sizzler Pro, or Quest Series — those models use separate infrared sear burner SKUs (IRB-SZR and IRB-QST respectively). If you are unsure which series your grill belongs to, check the model number on the grill's specification plate.

How does the installation work — does it require any orifice change or adapter?

No orifice change, adapter, or valve modification is required. The IRB-TRL is a plug-and-play swap — remove the existing standard burner from the slot you want to convert, drop the infrared element into position, and connect it to the existing valve. No drilling, cutting, or permanent grill modifications needed.

What surface temperature does the IRB-TRL reach?

The IRB-TRL reaches surface temperatures up to 1,600°F — significantly higher than what a standard gas tube burner can achieve at the grate surface. This is the temperature range needed for true Maillard reaction crust formation in seconds rather than minutes.

Can I still use my other TRL burners normally after installing the IRB-TRL?

Yes. The IRB-TRL replaces one main burner slot; all remaining standard burners in your TRL or TRLD grill operate exactly as before. The most common setup is installing the infrared burner in one of the outer slots — sear on the infrared end, then finish or hold at lower heat on the remaining standard burners in the same session.

How is 1,600°F infrared heat different from what my TRL burners already produce?

Your TRL's standard burners heat air inside the hood, which then convects heat to the grate and food. An infrared burner radiates heat directly to the grate surface — bypassing the air entirely. This produces faster surface temperature rise, more even heat across the zone (no cold patches between burner tubes), and less steam that can inhibit surface browning. The 1,600°F surface temperature is the direct result of this more efficient heat transfer method.

What foods work best with the IRB-TRL?

Thick-cut steaks, pork chops, lamb chops, and large fish fillets are the most common applications — cuts where maximum surface browning with a controlled interior temperature is the goal. The IRB-TRL also works well for reverse-sear finishing: cook your steak or roast on the standard TRL burners to target internal temperature, then hit the infrared zone for a fast, intense final crust.

Can I use the IRB-TRL for slow cooking?

No — the IRB-TRL is a high-heat searing tool designed to run at intense temperatures. For slow cooking, roasting, or holding temperature, use the remaining standard TRL burners with the infrared zone off or on its lowest setting.

How do I clean the ceramic infrared element?

Run the infrared burner on high for 10–15 minutes after cooking to burn off grease and food residue. Once cooled, brush away ash with a soft brush. Do not apply water or liquid cleaners directly to the hot ceramic surface — thermal shock from cold water on a heated ceramic element can cause cracking.

What is Summerset's warranty on the IRB-TRL?

The IRB-TRL is covered by Summerset's Gold Standard Lifetime Warranty on burners as a gas grill component. Warranty covers replacement parts only — labor is not included. Must be registered within 30 days of purchase with proof of purchase and photo documentation; valid for the original purchaser at the original delivery site only.

What shipping and return policies apply at Deck & Den?

Deck & Den offers free shipping on orders over $100 to the contiguous 48 states. The IRB-TRL is covered by Deck & Den's 45-day return policy. Price matching is available — contact us with a qualifying authorized-dealer price and we'll match it.

Privacy Policy


SECTION 1 — WHAT DO WE DO WITH YOUR INFORMATION?

When you buy something from our store, we collect the personal information you share with us as part of the buying-and-selling process—for example, your name, phone number, address, and email address.

When you browse our store, we also automatically receive your computer's internet protocol (IP) address, which helps us learn about your browser and operating system.

Email/SMS marketing (where applicable): With your permission, we may send you emails or text messages about our store, new products, and other updates.

SECTION 2 — CONSENT

How do you get my consent?

When you give us personal information to complete a transaction, verify your credit card, place an order, set up a delivery, or return a purchase, we take it that you consent to our collecting that information and using it solely for that specific purpose.

If we ask for your personal information for a secondary purpose, such as marketing, we will either ask you directly for your express consent or give you a chance to decline.

How do I withdraw my consent?

If you opt in and later change your mind, you may withdraw your consent—for us to contact you, and for the ongoing collection, use, or disclosure of your information—at any time. To do so, contact us at support@themaisonreserve.com or write to us at:

NGR Enterprises LLC (dba The Maison Reserve) 30 N Gould St, Sheridan, Wyoming 82801

SECTION 3 — DISCLOSURE

We may disclose your personal information if the law requires us to do so, or if you breach our Terms of Service.

SECTION 4 — SHOPIFY

Our store is hosted on Shopify Inc. Shopify supplies us with the online e-commerce platform that lets us sell our products and services to you.

Your data is kept within Shopify's data storage, databases, and the overall Shopify application. Shopify stores your data on a secure server protected by a firewall.

Payment:

We use Shopify Payments to process purchases. When you pay through Shopify Payments, your credit card details are stored by Shopify and encrypted in line with the Payment Card Industry Data Security Standard (PCI-DSS). Your purchase transaction data is retained only for as long as it takes to complete your purchase. Once your purchase is finished, that transaction information is deleted.

All direct payment gateways follow the standards established by PCI-DSS and overseen by the PCI Security Standards Council—a joint undertaking of brands such as Visa, MasterCard, American Express, and Discover.

The PCI-DSS requirements help make sure that credit card information is handled securely by our store and by the service providers we work with.

For more background, you may also wish to read Shopify's Terms of Service (https://www.shopify.com/legal/terms) or its Privacy Statement (https://www.shopify.com/legal/privacy).

SECTION 5 — THIRD-PARTY SERVICES

As a general rule, the third-party providers we use will only collect, use, and disclose your information to the degree needed for them to carry out the services they perform for us.

That said, some third-party service providers—such as payment gateways and other payment-processing services—maintain their own privacy policies covering the information we have to share with them for your purchase-related transactions.

For these providers, we suggest you read their privacy policies so that you understand how they will handle your personal information.

Keep in mind, in particular, that some providers may be based in—or operate facilities located in—a jurisdiction that differs from yours or ours. So if you decide to go ahead with a transaction that relies on a third-party service provider, your information may then fall under the laws of the jurisdiction(s) where that provider or its facilities are located.

For instance, if you are located in Canada and your transaction is processed by a payment gateway based in the United States, the personal information you use to complete that transaction may be subject to disclosure under U.S. law, including the Patriot Act.

Once you leave our store's website, or are redirected to a third-party website or application, this Privacy Policy and our website's Terms of Service no longer apply to you.

Links

When you click links on our store, they may take you away from our site. We are not responsible for the privacy practices of other sites, and we encourage you to read their privacy statements.

SECTION 6 — SECURITY

To safeguard your personal information, we take reasonable precautions and follow industry best practices to ensure it is not improperly lost, misused, accessed, disclosed, altered, or destroyed.

If you provide us with your credit card information, that information is encrypted using secure socket layer technology (SSL) and stored with AES-256 encryption. While no method of transmission over the Internet or of electronic storage is completely secure, we comply with all PCI-DSS requirements and apply additional generally accepted industry standards.

SECTION 7 — COOKIES

Below is a list of the cookies we use. We've set them out here so you can decide whether or not you want to opt out of cookies.

_session_id, unique token, sessional — Lets Shopify store information about your session (referrer, landing page, and so on).
_shopify_visit, no data held, persists for 30 minutes from the last visit — Used by our website provider's internal stats tracker to record the number of visits.
_shopify_uniq, no data held, expires at midnight (relative to the visitor) on the following day — Counts the number of visits to a store by a single customer.
cart, unique token, persists for 2 weeks — Stores information about what's in your cart.
_secure_session_id, unique token, sessional.
storefront_digest, unique token, indefinite — If the shop is password-protected, this is used to determine whether the current visitor has access.

SECTION 8 — AGE OF CONSENT

By using this site, you confirm that you have reached at least the age of majority in your state or province of residence, or that you have reached the age of majority in your state or province of residence and have given us your consent to allow any of your minor dependents to use this site.

SECTION 9 — CHANGES TO THIS PRIVACY POLICY

We retain the right to change this privacy policy at any time, so please check it often. Changes and clarifications take effect as soon as they are posted on the website. If we make material changes to this policy, we will let you know here that it has been updated, so that you are aware of what information we collect, how we use it, and the circumstances—if any—under which we use and/or disclose it.

If our store is acquired by, or merges with, another company, your information may be transferred to the new owners so that we can continue to sell products to you.

SECTION 10 — ONLINE ADVERTISING

We use Google Ads remarketing to advertise across the Internet. Google Ads remarketing displays relevant ads tailored to you, based on which parts of our website you have viewed, by placing a cookie on your device. THIS COOKIE DOES NOT IDENTIFY YOU IN ANY WAY OR GIVE ANYONE ACCESS TO YOUR COMPUTER. Instead, the cookie simply signals, "this person visited this page, so show them ads related to that page." Google Ads remarketing lets us tailor our marketing to better suit your needs and show only ads that are relevant to you.

If you would prefer not to take part in our Google Ads remarketing, you can opt out by visiting Google's Ads Settings at www.google.com/settings/u/0/ads.

You can also opt out of any third-party vendor's use of cookies by visiting www.networkadvertising.org/choices/.

QUESTIONS AND CONTACT INFORMATION

If you would like to access, correct, amend, or delete any personal information we hold about you, file a complaint, or simply want more information, please contact us at support@themaisonreserve.com or by mail at:

NGR Enterprises LLC (dba The Maison Reserve) 30 N Gould St, Sheridan, Wyoming 82801